Aluninum Oxide Flap Disc

Now the flap disc is widely used in shipbuilding, automotive, aviation, machinery, instrumentation, bridge and construction industries, but what are the advantages of flap disc? And how to use the flap disc correctly? Let Doma Carbide Tools tell you.
Description

Characteristic

 Warranty:

 Product Defects Only

 Description:

 Aluninum Oxide Flap Disc

 Abrasive Cloth Material:

 Alumina Abrasive Cloth

 Applicable Machine:

 Angle Grinder

 Recommended Applications:

 Deburring. Grinding weld joint, removing spots and any form of oxidized surface and rust from the workpiece.

 Application Materials:

 Alloy steel and carbon steel, aluminum, nonferrous metals and alloys, steel, plastics, wood, etc.



Specification

Dia. x bore Dia.

Selectable Granularityk

Maximum Speed

Packaging

(mm)

(Piece/Box)

100 x 15

P24/P36/P40/P60/P80/P120/P150/P180/P240/P320

15,300

10

100 x 16

15,300

10

115 x 22

13,300

10

125 x 22

12,200

10

150 x 22

10,200

10

180 x 22

8,500

10

230 x 22

6,600

10

250 x 22

6,600

10



Description
Aluninum oxide flap disc is also called corundum flap disc.

Our aluninum oxide flap disc can be used in any angle grinder, can directly interchangeable with depressed center wheel, it has strong elasticity, high strength of extension and flexure strength, good self-sharpening, large grinding removal quantity and high efficiency. It is suitable for grinding the flash burr on the workpiece after welding or stamping.

♦ 1. Please check whether the flap disc is deformed, damp or peeled off before grinding. If so, please replace a new one.

♦ 2. When replacing a new flap disc, it is forbidden to knock it, ensure that the flap disc is appropriately tightness, and check whether the protective cover of the angle grinder is intact.

♦ 3. Before turning on your angle grinder, you must wear protective goggles, dust masks, safety gloves and other labor protection equipment.

♦ 4. After turning on the angle grinder, please free running for 1 minute toward the ground where no man's place.

♦ 5. In the grinding operation, please keep the aluninum oxide flap disc and the workpiece processing surface at an angle of 15°-30°. It is strictly prohibited to impact with the workpiece and put too much power. It is necessary to master the strength and don't to be remittent.

♦ 6. When in use, do not exceed the maximum working speed on the instruction manual of the flap disc.

♦ 7. Please store it properly, keep it ventilated and dry, prohibit squeezing and be affected with damp.

Review

1/3
X